认 证：工商信息已核实
访问量：1073698
FT-100A振实密度测试仪Tap density tester
一、概述：Overview
设计参考人体工学，操作简单.参照USP、BP 、EP药典的规范；GB/T5162-2006；ISO3953:1993；GB/T31057.2-2018.
二、适用范围：Scope of application
适用于非金属粉、金属粉体、制药、化工、电池、磨料以及科研教学等领域，是粉体行业振实密度测试的理想仪器。
It is suitable for non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and research teaching etc field , which is an ideal instrument for the tap density testing of powder industry
三、 工作原理： Working principle
将粉末量筒固定在机械振动装置上，振动电机带动机械振动装置上下振动，装有粉末的刻度量筒随机械振动装置而发生有节拍的振动，随着振动次数的增加，量筒里的粉末逐渐振实，振动次数达到设定的次数后，机械振动装置停止振动，读出刻度试管的体积，根据密度的定义：质量除以体积、从而求出振实后的粉末密度。
Powder cylinder fixed in the mechanical vibration device, mechanical vibration device vibrate under driven by vibrating motor, the calibration test tubes which containing powder vibrate with the mechanical vibration device, with the increase of vibration frequency, the powder in the measuring cylinder gradually compact by vibration, When vibration frequency reaching setting the number of times, mechanical vibration device will stop the vibration, Read the volume of the calibration test tube, according to the definition of density: mass divided by volume, thus find out the powder density after compaction.
四、各型号及参数描述model and parameter description
功能项目/型号 project/model | FT-100A |
1.测试工位数Test number | 1个 one |
1. 测试数据处理方式 Test data processing method | 带打印+自动计算 With print + automatic calculation |
量筒（玻璃材质）定质量法使用Measuring | 25ml、50ml、100ml、250ml（选购10ml量筒用于25ml以下样品测试）. |
2. 密度density | 0-9.9999g/cm3 |
3. 测量模式measurement | 振次Vibration |
4. 振幅 range of vibration | 1-14mm整数可调； Maximum 14mm, integer 1-14mm adjustable; |
5. 振动频率 vibrational frequency | 0～300 次/分（连续可调）times/ minute. (continuous adjustable)
|
6. 测试方法 | 定质量法（标配）；定体积法（选购不锈钢组合量筒部件） |
7. 定体积法组合量筒（选购） | 配置不锈钢量筒25ml；100ml；（或选购10ml量筒用于25ml以下样品测试）.组合量筒由上套筒和标定体积量筒组成. |
8.参照标准standards | USP、BP 、EP药典的规范；GB/T5162-2006；ISO3953:1993；GB/T31057.2-2018. |
9.量筒要求 Measuring cylinder requirements | 1.容积为Volume 25±0.5ml 允差为±0.25ml； 2.容积Volume 100±1.0ml，允差为±0. 5ml； 3.容积Volume 10±0.2ml，允差为±0.10ml 配置量筒盖，在振实过程中防粉体向外飞溅性溢出. |
11．重复性repeatability | 误差Deviation：≤1% |
12.准确性Accuracy | 误差Deviation：≤1% |
测试方法的选择 | 定质量法适用于：不易粘在量筒上的粉体样品；定体积法适用于：容易粘在量筒上的超细粉体样品. |
13. 应用领域 Scope of application
| 非金属粉、金属粉 、制药、化工、电池、磨料以及科研教学等粉体颗粒物料 Non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and scientific research teaching and other powder particle materials |
14.电源Power supply | 交流Ac 220V(50Hz/60Hz)、40W |
15.使用环境 Operational environment
| 湿度小于85%，无凝结现象，无烟尘，无机械振动源或电磁干扰源 Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source |
16.其他选购项目 Buy items | a.3Q验证文件 b.隔音箱 c.水分仪 d.粉体真密度仪 e.松装密度仪 a.3Q verification file b. sound box c. moisture meter d. powder true density meter e. bulk density meter |
- 推荐产品
- 供应产品
- 产品分类